| Sl No. | Material | Contents in Percentage | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| C | Si | Cr | Mo | Ni | W | Co | Cu | T | Mn | V | I | ||
| 1 | C.I G-15 | 3.3-3.9 | 2.6-3.3 | 1.2-1.5 | 1.2-1.5 | - | - | - | 0.7-1.0 | - | - | - | - |
| 2 | GGZ D4 | 1.8-2.3 | 0.8-1.3 | 12.0-14.0 | 2.0-2.5 | 0.5 | - | - | - | - | - | - | - |
| 3 | Gz-GCrV300 | 1.8-2.0 | 0.8-1.0 | 12.0-13.0 | 2.0-2.5 | - | - | - | - | - | - | - | - |
| 4 | H 24 (v 411) | 1.4-2.4 | 1.4-2.4 | 12.0-16.0 | 0.3-0.5 | - | - | - | - | - | - | - | - |
| 5 | HITACHI CRQ | 2.0-2.2 | 0.3-0.6 | 12.0-15.0 | 1.3-1.8 | - | - | - | - | - | - | - | - |
| 6 | PB 1F | 1.2-1.6 | - | 7.0-9.0 | 0.4-0.8 | 1.0-2.5 | 2.0-3.5 | 7.0-9.0 | - | - | - | - | - |
| 7 | PEARLITE CAST IRC | 3.7-3.85 | 1.9-2.1 | 0.25-0.35 | - | - | - | - | - | - | - | - | - |
| 8 | PL 12 Mv 425 | 1.8-2.3 | 0.8-1.0 | 12.0-14.0 | 2.0-2.5 | - | - | - | - | - | - | - | - |
| 9 | PL 33 Mv 425 | 1.8-2.3 | 1.8-2.1 | 33.0-35.0 | 2.0-2.5 | 0.5 | - | - | - | - | - | - | - |
| 10 | PL 6N | 3.1-3.5 | 1.8-2.2 | 1.0-1.3 | 1.0-1.3 | 0.2-0.4 | - | - | - | - | - | - | - |
| 11 | PL 7N/GZ D5 | 3.1-3.5 | 1.8-2.2 | 0.5-0.8 | 1.0-1.3 | 0.8-1.2 | - | - | - | - | - | - | - |
| 12 | SAE J610 | 1.25-1.75 | 1.9-2.6 | 19.0-21.0 | - | 1.0-1.8 | - | - | - | - | - | - | - |
| 13 | STELLITE | 2.0-2.7 | 1.0 | 29.0-33.0 | - | 3% | 11.0-14.0 | 41.3 | - | - | - | - | - |
| 14 | SUH-3 | 0.35-0.45 | 1.8-2.5 | 10.0-12.0 | 0.7-1.3 | - | - | - | - | - | - | - | - |
| 15 | SUH-4 | 0.75-0.85 | 1.75-2.25 | 19.0-20.5 | - | 1.15-1.65 | - | - | - | - | - | - | - |
| 16 | VALMET | 1.5-2.0 | 1.5-2.0 | 13.5-15.0 | 0.35-0.5 | - | - | - | - | - | - | - | - |
| 17 | WELLTITE | 2.0-2.4 | 1.5-1.9 | 11.0-13.0 | 5.0-7.0 | 38.0-42.0 | 0.4-0.6 | - | - | - | - | - | - |
| 18 | SLICHROME XB | 1.25-1.75 | 1.90-2.60 | 19.00-21.00 | - | 1.00-1.60 | - | - | - | - | .20-.60 | - | - |
| 19 | HIGH CHROME SILICON STEEL | 1.80-2.30 | 1.80-2.10 | 33.00-35.00 | 2.00-2.50 | .50MAX | - | - | - | - | .60MAX | - | - |
| 20 | MODIFIED M2 TOOL STEEL (No V) | 1.20-1.50 | .30-.60 | 3.50-4.25 | 6.00-7.00 | 1.00MAX | - | - | - | 5.00-6.00 | .30-.60 | - | - |
| 21 | MODIFIED M2 TOOL STEEL | 1.20-1.50 | .30-.60 | 3.50-4.25 | 6.00-7.00 | 1.00MAX | - | - | - | 5.00-6.00 | .30-.60 | 1.35-1.65 | - |
| 22 | GM 3550M | 2.00-2.75 | 1.00MAX | 27.00-31.00 | - | 46.00-52.00 | - | - | - | 14.00-16.00 | - | - | 8.00MAX |
| 23 | GM3546M | 2.00-2.75 | 1.00MAX | 27.00-31.00 | - | Bal | - | 9.00-11.00 | - | 14.00-16.00 | - | - | 8.00MAX |
